Mani Bhadra - Phoenix Import

Singing bowls Chöpa 

Singing bowls Chö-pa (also known as Tibetan Singing Bowls, rin gongs, Himalayan bowls or suzu gongs) are a type of bell, specifically classified as a standing bell. Rather than hanging inverted or attached to a handle, singing bowls sit with the bottom surface resting. The sides and rim of singing bowls vibrate to produce sound characterized by a fundamental frequency (first harmonic) and usually two audible harmonic overtones (second and third harmonics). According to singing bowl researcher Joseph Feinstein, singing bowls were traditionally used in Asia and the tradition of making sound with bronze bowls could go back 3,000 or more years to the Bronze Age.
Composition Nepal/Tibetan Singing Bowls :
NE0264, NE0265 and NE0269: Copper 71.5% / Tin 28% / Nickel 0.02% / Mercury 0.01% / Zinc 0.02% / Iron 0.02% / Lead 0.001% / Silver 0.002% / Gold 0.0001%.">NE0262 and NE0266: Copper 71% / Tin 28.5% / Nickel 0.02% / Mercury 0.01% / Zinc 0.02% / Iron 0.02% / Lead 0.001% / Silver 0.002% / Gold 0.0001%.

Wholesaler Phoenix Import, the best choice for Singing Bowls with good vibration and reasonable prices! 
Products 1 - 39 of 39

New products in this category

Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/46

Weight: 8900-9100 g; Dimensions: 46 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.


Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.
The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.

All products in this category

Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/09

Weight: 200-250 g; Dimensions: 10 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.

Composed of 8 (noble) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.

The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.


Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/10

Weight: 250-300 g; Dimensions: 10.5 cm

Singing bowl Chö-pa


A classical, hand hammered singing bowl, with its own unique sounds.

Composed of 8 (noble) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.
The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.





Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/101

Weight: 300-375 g; Dimensions: 11 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.

Composed of 8 (noble) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.
The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.



Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/11

Weight: 375-425 g; Dimensions: 12 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.
Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.

The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.



Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/111

Weight: 425-475 g; Dimensions: 12 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.

Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.
The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.



Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/12

Weight: 475-525 g; Dimensions: 12.5 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.

Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.

The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.

Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/121

Weight: 525-600 g; Dimensions: 13 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.

Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.

The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.

Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/13

Weight: 600-675 g; Dimensions: 14 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.

Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.

The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.

Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/14

Weight: 675-775 g; Dimensions: 14.5 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.

Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.

The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.

Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/15

Weight: 775-900 g; Dimensions: 16-17.5 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.

Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.
The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.


Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/16

Weight: 925-1050 g; Dimensions: 18-19 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.

Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.
The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.

Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/17

Weight: 1050-1150 g; Dimensions: 19-20 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.

Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.
The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.

Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/18

Weight: 1150-1250 g; Dimensions: 20-21 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.

Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.
The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.

Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/21

Weight: 1250-1325 g; Dimensions: 21 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.


Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.
The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.


Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/23

Weight: 1325-1450 g; Dimensions: 21.5 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.


Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.
The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.


Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/25

Weight: 1450-1550 g; Dimensions: 22-23 cm

Singing bowl Chö-pa


A classical, hand hammered singing bowl, with its own unique sounds.

Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.
The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.



Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/26

Weight: 1600-1700 g; Dimensions: 23.5 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.


Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.
The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.


Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/261

Weight: 1700-1825 g; Dimensions: 24 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.


Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.
The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.


Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/262

Weight: 1825-1950 g; Dimensions: 25 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.


Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.
The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.


Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/27

Weight: 1950-2050 g; Dimensions: 30 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.


Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.
The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.

Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/28

Weight: 2050-2200 g; Dimensions: 28 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.


Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.
The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.

Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/281

Weight: 2200-2450 g; Dimensions: 28-29 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.


Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.
The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.

Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/29

Weight: 2450-2600 g; Dimensions: 29 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.


Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.
The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.


Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/30

Weight: 2600-2850 g; Dimensions: 30 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.


Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.
The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.


Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/32

Weight: 2950-3050 g; Dimensions: 30 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.


Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.
The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.


Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/321

Weight: 3050-3200 g; Dimensions: 31 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.


Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.
The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.


Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/33

Weight: 3200-3400 g; Dimensions: 33 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.


Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.
The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.


Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/34

Weight: 3400-3600 g; Dimensions: 34 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.


Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.
The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.


Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/35

Weight: 3600-3800 g; Dimensions: 35 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.


Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.
The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.


Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/36

Weight: 4000-4300 g; Dimensions: 36 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.

Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.
The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.

Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/37

Weight: 4300-4600 g; Dimensions: 36 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.


Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.
The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.

Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/371

Weight: 6100-6300 g; Dimensions: 38 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.


Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.
The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.

Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/38

Weight: 6400-6600 g; Dimensions: 41 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.


Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.
The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.

Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/39

Weight: 6600-6800 g; Dimensions: 39 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.


Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.
The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.

Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/441

Weight: 8300-8600 g; Dimensions: 44 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.


Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.
The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.

Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/45

Weight: 8600-8700 g; Dimensions: 45.5 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.


Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.
The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.

Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/46

Weight: 8900-9100 g; Dimensions: 46 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.


Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.
The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.

Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/48

Weight: 9400-9700 g; Dimensions: 48 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.


Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.
The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.

Image for: Singing bowl Chö-pa

Singing bowl Chö-pa

Productnr.: NE0266/50

Weight: 10500 g; Dimensions: 50 cm

Singing bowl Chö-pa

A classical, hand hammered singing bowl, with its own unique sounds.


Composed of 8 (nobel) metals: Copper, Tin, Nickel, Zinc, Iron, Lead, Mercury, Silver.
The percentages of the 8 metals, the diameter and the thickness of the different types singing bowls creating their own unique sound and overtones from each singing bowl.

Detailed product description
Beaten or hand hammered singing bowls are made entirely by hand. Each singing bowl is carefully hammered by hand, which requires several steps. Initially, the various compositions of raw metals  for the preparation(copper, tin, nickel, zinc, iron, lead, silver and mercury), are melted int he furnace, according to the manufacturing requirements of either bronze, eight metals singing bowls and so forth. The hot melted metal is removed from the furnace and poured into different sized gully cups and cube shapes. Then, the metal moulds are rolled out into circular metals sheets of the required size and thickness. The sheets are then hammered according to precise measurement specifications and categorized according to weight and size. For the hammering process, 4 to 5 metal sheets are stacked and then heated at very high temperature. The red hot metal sheets are hammered by a group of skilled craftsmen until the heat in the metal cools. This process is repeated several times to form the desired size and shape of each singing bowl. (This is the reason for the fluctuations in the size and hand hammered singing bowls). Only if the meal glows red, can it be hammered. Actually, once cool, it loses its flexibility, becoming more fragile, and therefore risking the formation of cracks when struck.When the desired shape is achieved, the individual process of finely tuning and shaping each singing bowl begins. Finally, the individual singing bowls are engraved and the inner and outer surfaces smoothed flawlessly.

Products 1 - 39 of 39

Yogi & Yogini

Our Trademarks

Products for
Yogis & Yoginis

Designed with love

For men and women

For body and mind

For Joy and Happiness!

Our Trademarks

Meditation

Scarf black

18085

Dimensions: 70×200 cm

More meditation

Healthy Lifestyle

Yogatools

New products

Tourmaline py…

Tourmaline pyramid

78147

Dimensions: 2.5-3 cm

>>>

Verbena liqui…

Rose shower g…

Atmospheric l…

corporate social responsibility 

Mani Bhadra - Phoenix Import - Importer and wholesaler

HELLO

Mani Bhadra BV - Phoenix Import is a forward-thinking company!  
We embed sustainability into the core of our business operations to create shared value for business and society. 
We are proud to be a socially responsible cooperate.

To our customers and those of you looking for products that contribute to vitality, joy, peace and spiritual development, we would like to say: you can enjoy doing business with us and know that we care for both our producers and their workers, for our products, for our customers and for the world.

We delight in serving you in the best way we can.

From our team, from our heart.

Who can buy from us?

Businesses, therapists and centers with a Chamber of Commerce number.

Links for rapid access to:

> Contact form
> Reports on delivery form

Cookie setting

This website uses Google Analytics to analyze your use of our sites so we can determine how best to serve you. We also use cookies from e.g. Facebook, Twitter and Google to integrate social media into our website. Below you can decide which cookies we can and cannot use.

More information is available at "Privacy & Cookies".