Mani Bhadra BV - Phoenix Import

Singing bowls OHM

Ohm singing bowls (till 2500 grams) are carved on the inside with the Sanskrit Ohm symbol. It is said that in this way the Ohm will spread a magic and peaceful vibration in the surrounding area.

Composition of Nepal/Tibetan Singing Bowls : 
NE0264, NE0265 and NE0269: Copper 71.5% / Tin 28% / Nickel 0.02% / Mercury 0.01% / Zinc 0.02% / Iron 0.02% / Lead 0.001% / Silver 0.002% / Gold 0.0001%.">NE0262 and NE0266: Copper 71% / Tin 28.5% / Nickel 0.02% / Mercury 0.01% / Zinc 0.02% / Iron 0.02% / Lead 0.001% / Silver 0.002% / Gold 0.0001%.
With 100% satisfaction guaranteed and the right of return!

Singing bowls (also known as Tibetan Singing Bowls, rin gongs, Himalayan bowls or suzu gongs) are a type of bell, specifically classified as a standing bell. Rather than hanging inverted or attached to a handle, singing bowls sit with the bottom surface resting. The sides and rim of singing bowls vibrate to produce sound characterized by a fundamental frequency (first harmonic) and usually two audible harmonic overtones (second and third harmonic). According to singing bowl researcher Joseph Feinstein, singing bowls were traditionally used in Asia and the tradition of making sound with bronze bowls could go back 3,000 or more years to the Bronze Age.
Singing bowls are used worldwide for meditation, music, relaxation, personal well-being. They are used by a wide range of professionals, including health workers, school teachers, musicians and spiritual teachers. Singing bowls are used in health care by psychotherapists, massage therapists, cancer specialists, stress and meditation specialists. They are used to help treat cancer patients and also for post traumatic stress disorder. They are popular in classrooms to help facilitate group activities and focus students' attention.

Singing bowls were historically made throughout Asia, especially Nepal, China and Japan. They are closely related to decorative bells made along the silk road from the Near East to Western Asia. Today they are made in Nepal, India, Japan, China and Korea. The best known types are from the Himalayan region and are often referred to as Tibetan singing bowls although any history in Tibet is disputable as there are none found there today.

In Tibetan Buddhist practice, singing bowls are used as a signal to begin and end periods of silent meditation. Some practitioners, for example, Chinese Buddhists use the singing bowl to accompany the wooden fish during chanting, striking it when a particular phrase is chanted. In Japan and Vietnam, singing bowls are similarly used during chanting and may also mark the passage of time or signal a change in activity, for example changing from sitting to walking meditation. In Japan, singing bowls are used in traditional funeral rites and ancestor worship. Every Japanese temple holds a singing bowl. Singing bowls are found on altars and in meditation rooms worldwide.
The oral and written traditions from the Himalayan region are vast and largely unknown in the West. It is unknown whether there are any traditional texts about singing bowls. All known references to them are strictly modern. However, a few pieces of art dating from several centuries collections. The tradition may date significantly earlier since bronze has been used to make musical instruments for thousands of years. Bronze bells from Asia have been discovered as early as the 8th?10th century BC and singing bowls are thought to go back in the Himalayas to the 10th-12th century AD (Feinstein, 2011).

Singing bowls are played by striking the rim of the bowl with a padded mallet. They can also be played by the friction of rubbing a wood, plastic, or leather wrapped mallet around the rim of the bowl to emphasize the harmonic overtones and a continuous 'singing' sound.
Singing bowls produce a unique sound and also physical vibration that can be felt. They produce multiple harmonic overtones at the same time which gives the instrument an unusual complex tone.
Both antique and new bowls are widely used as an aid to meditation. They are also used in yoga, music therapy, sound healing, religious services, performance and for personal enjoyment.
Singing bowls are still manufactured today in the traditional way as well as with modern manufacturing techniques. New bowls may be plain or decorated. They sometimes feature religious iconography and spiritual motifs and 
Symbols, such as the Tibetan mantra Om mani padme hum, images of Buddhas, and Ashtamangala (the 8 auspicious Buddhist symbols). 

Wholesaler Phoenix Import, the best choice for Ohm singing bowls with good vibration and reasonable prices!

Products 1 - 17 of 17
Image for: Singing bowl Ohm gift set red

Singing bowl Ohm gift set red

Productnr.: NE0292

Weight: 180 g; Dimensions: 8 cm

Singing bowl Ohm gift set red

Contents:
Singing bowl Ohm with beautiful decoration.
Singing bowl stick.
Singing bowl support pillow red with Ohm embroidery.
Gift box from lokta paper, colour red
Decorations can be differnt from showed picture!

Materials: metal mix (Cu, Zn, Sn, Ag, Ni, Cd, Ru, Pd, Pt, Cr, Mn).


Image for: Singing bowl Ohm gift-set black

Singing bowl Ohm gift-set black

Productnr.: NE0293

Weight: 300 g; Dimensions: 10 cm

Singing bowl Ohm gift-set black

Contents:
Singing bowl Ohm with beautiful decoration.
Singing bowl stick.
Singing bowl support pillow with Ohm embroidery.
Gift box from lokta paper, colour black
Decorations can be differnt from shown picture!

Materials: metal mix (Cu, Zn, Sn, Ag, Ni, Cd, Ru, Pd, Pt, Cr, Mn).


Image for: Singing Bowl OHM (engraving)

Singing Bowl OHM (engraving)

Productnr.: NE0264/09

Weight: 200-250 g; Dimensions: 9 cm

Singing Bowl OHM: original singing bowl - with the OHM symbol engraved in the interior

Attention please !
You need to order the singing bowl rubbing sticks separately - see singing bowl accessories: www.phoeniximport.eu/pag,en,cat,565.html 

Beaten Singing Bowls: Beaten or hand hammered singing bowls are made by way of a complete hand hammering process. Every single singing bowl is carefully hand beaten, which requires several processes to finish up and shaping it into a perfect hand hammered singing bowl. In the making process, first the various composition of metals as raw materials (copper, tin, zinc, iron, lead, gold and silver) are melted in furnace, depending on manufacturing needs such as for the making of bronze singing bowls or for seven metal singing bowls. The hot melted metal is removed from the furnace and poured into dice to prepare a metal mould for the various sizes and weights. Then, the round metal moulds are cut into round metal discs in needed size and thickness. After that, these discs are hand beaten or hammered, after precise measurement and categorized for weight and sized bowls. Regarding the hand hammering process of singing bowls, 4 to 5 metal discs are piled up, one upon the other, and then heated to red hot. The red hot metal sheets are hammered by a group of expert artisans, as long as the heat remains in metal, and then again processed to red heating, for a continuous beating process. This heating and beating  of the bundled and piled up metal discs continues until a desired shape and size is formed. (That is why the hammered or beaten singing bowls will be proportionately different in a size and diameter with each individual singing bowl.) During the hammering process of these singing bowls, the metal disc can only be hammered during the time of being red hot, while it remains soft and flexible. Because when the metal gets colder, it will loose its softness and flexibility, which in turn makes the metal brittle and thus the bowl could be ruined. The reason behind this intensive working process is that the metal content (bronze or seven metals mixture) is very sensitive to heat and gets harder when it looses its hot temperature and will get cracks and breaks.
After completion of shaping the desired bowls, the individual work will start. At this stage, every bowl is brought into uniform shape and size, and once more, this can only be done during the red burning and heating and beating process. After finalizing the shape and size, more hammering is done for a final fine tuning and shaping of the singing bowls. The individual singing bowls are then chiselled and scoured for the finishing touch, at the inside and outside.

Image for: Singing Bowl OHM (engraving)

Singing Bowl OHM (engraving)

Productnr.: NE0264/10

Weight: 250-300 g; Dimensions: 9-10 cm

Singing Bowl OHM: original singing bowl - with the OHM symbol engraved in the interior

Attention please !
You need to order the singing bowl rubbing sticks separately - see singing bowl accessories: www.phoeniximport.eu/pag,en,cat,565.html 

Beaten Singing Bowls: Beaten or hand hammered singing bowls are made by way of a complete hand hammering process. Every single singing bowl is carefully hand beaten, which requires several processes to finish up and shaping it into a perfect hand hammered singing bowl. In the making process, first the various composition of metals as raw materials (copper, tin, zinc, iron, lead, gold and silver) are melted in furnace, depending on manufacturing needs such as for the making of bronze singing bowls or for seven metal singing bowls. The hot melted metal is removed from the furnace and poured into dice to prepare a metal mould for the various sizes and weights. Then, the round metal moulds are cut into round metal discs in needed size and thickness. After that, these discs are hand beaten or hammered, after precise measurement and categorized for weight and sized bowls. Regarding the hand hammering process of singing bowls, 4 to 5 metal discs are piled up, one upon the other, and then heated to red hot. The red hot metal sheets are hammered by a group of expert artisans, as long as the heat remains in metal, and then again processed to red heating, for a continuous beating process. This heating and beating  of the bundled and piled up metal discs continues until a desired shape and size is formed. (That is why the hammered or beaten singing bowls will be proportionately different in a size and diameter with each individual singing bowl.) During the hammering process of these singing bowls, the metal disc can only be hammered during the time of being red hot, while it remains soft and flexible. Because when the metal gets colder, it will loose its softness and flexibility, which in turn makes the metal brittle and thus the bowl could be ruined. The reason behind this intensive working process is that the metal content (bronze or seven metals mixture) is very sensitive to heat and gets harder when it looses its hot temperature and will get cracks and breaks.
After completion of shaping the desired bowls, the individual work will start. At this stage, every bowl is brought into uniform shape and size, and once more, this can only be done during the red burning and heating and beating process. After finalizing the shape and size, more hammering is done for a final fine tuning and shaping of the singing bowls. The individual singing bowls are then chiselled and scoured for the finishing touch, at the inside and outside.

Image for: Singing Bowl OHM (engraving)

Singing Bowl OHM (engraving)

Productnr.: NE0264/101

Weight: 300-375 g; Dimensions: 10-10.5 cm

Singing Bowl OHM: original singing bowl - with the OHM symbol engraved in the interior

Attention please !
You need to order the singing bowl rubbing sticks separately - see singing bowl accessories: www.phoeniximport.eu/pag,en,cat,565.html 

Beaten Singing Bowls: Beaten or hand hammered singing bowls are made by way of a complete hand hammering process. Every single singing bowl is carefully hand beaten, which requires several processes to finish up and shaping it into a perfect hand hammered singing bowl. In the making process, first the various composition of metals as raw materials (copper, tin, zinc, iron, lead, gold and silver) are melted in furnace, depending on manufacturing needs such as for the making of bronze singing bowls or for seven metal singing bowls. The hot melted metal is removed from the furnace and poured into dice to prepare a metal mould for the various sizes and weights. Then, the round metal moulds are cut into round metal discs in needed size and thickness. After that, these discs are hand beaten or hammered, after precise measurement and categorized for weight and sized bowls. Regarding the hand hammering process of singing bowls, 4 to 5 metal discs are piled up, one upon the other, and then heated to red hot. The red hot metal sheets are hammered by a group of expert artisans, as long as the heat remains in metal, and then again processed to red heating, for a continuous beating process. This heating and beating  of the bundled and piled up metal discs continues until a desired shape and size is formed. (That is why the hammered or beaten singing bowls will be proportionately different in a size and diameter with each individual singing bowl.) During the hammering process of these singing bowls, the metal disc can only be hammered during the time of being red hot, while it remains soft and flexible. Because when the metal gets colder, it will loose its softness and flexibility, which in turn makes the metal brittle and thus the bowl could be ruined. The reason behind this intensive working process is that the metal content (bronze or seven metals mixture) is very sensitive to heat and gets harder when it looses its hot temperature and will get cracks and breaks.
After completion of shaping the desired bowls, the individual work will start. At this stage, every bowl is brought into uniform shape and size, and once more, this can only be done during the red burning and heating and beating process. After finalizing the shape and size, more hammering is done for a final fine tuning and shaping of the singing bowls. The individual singing bowls are then chiselled and scoured for the finishing touch, at the inside and outside.

Image for: Singing Bowl OHM (engraving)

Singing Bowl OHM (engraving)

Productnr.: NE0264/11

Weight: 375-425 g; Dimensions: 11-12 cm

Singing Bowl OHM: original singing bowl - with the OHM symbol engraved in the interior

Attention please !
You need to order the singing bowl rubbing sticks separately - see singing bowl accessories: www.phoeniximport.eu/pag,en,cat,565.html 

Beaten Singing Bowls: Beaten or hand hammered singing bowls are made by way of a complete hand hammering process. Every single singing bowl is carefully hand beaten, which requires several processes to finish up and shaping it into a perfect hand hammered singing bowl. In the making process, first the various composition of metals as raw materials (copper, tin, zinc, iron, lead, gold and silver) are melted in furnace, depending on manufacturing needs such as for the making of bronze singing bowls or for seven metal singing bowls. The hot melted metal is removed from the furnace and poured into dice to prepare a metal mould for the various sizes and weights. Then, the round metal moulds are cut into round metal discs in needed size and thickness. After that, these discs are hand beaten or hammered, after precise measurement and categorized for weight and sized bowls. Regarding the hand hammering process of singing bowls, 4 to 5 metal discs are piled up, one upon the other, and then heated to red hot. The red hot metal sheets are hammered by a group of expert artisans, as long as the heat remains in metal, and then again processed to red heating, for a continuous beating process. This heating and beating  of the bundled and piled up metal discs continues until a desired shape and size is formed. (That is why the hammered or beaten singing bowls will be proportionately different in a size and diameter with each individual singing bowl.) During the hammering process of these singing bowls, the metal disc can only be hammered during the time of being red hot, while it remains soft and flexible. Because when the metal gets colder, it will loose its softness and flexibility, which in turn makes the metal brittle and thus the bowl could be ruined. The reason behind this intensive working process is that the metal content (bronze or seven metals mixture) is very sensitive to heat and gets harder when it looses its hot temperature and will get cracks and breaks.
After completion of shaping the desired bowls, the individual work will start. At this stage, every bowl is brought into uniform shape and size, and once more, this can only be done during the red burning and heating and beating process. After finalizing the shape and size, more hammering is done for a final fine tuning and shaping of the singing bowls. The individual singing bowls are then chiselled and scoured for the finishing touch, at the inside and outside.

Image for: Singing Bowl OHM (engraving)

Singing Bowl OHM (engraving)

Productnr.: NE0264/111

Weight: 425-475 g; Dimensions: 12 cm

Singing Bowl OHM: original singing bowl - with the OHM symbol engraved in the interior

Attention please !
You need to order the singing bowl rubbing sticks separately - see singing bowl accessories: www.phoeniximport.eu/pag,en,cat,565.html 

Beaten Singing Bowls: Beaten or hand hammered singing bowls are made by way of a complete hand hammering process. Every single singing bowl is carefully hand beaten, which requires several processes to finish up and shaping it into a perfect hand hammered singing bowl. In the making process, first the various composition of metals as raw materials (copper, tin, zinc, iron, lead, gold and silver) are melted in furnace, depending on manufacturing needs such as for the making of bronze singing bowls or for seven metal singing bowls. The hot melted metal is removed from the furnace and poured into dice to prepare a metal mould for the various sizes and weights. Then, the round metal moulds are cut into round metal discs in needed size and thickness. After that, these discs are hand beaten or hammered, after precise measurement and categorized for weight and sized bowls. Regarding the hand hammering process of singing bowls, 4 to 5 metal discs are piled up, one upon the other, and then heated to red hot. The red hot metal sheets are hammered by a group of expert artisans, as long as the heat remains in metal, and then again processed to red heating, for a continuous beating process. This heating and beating  of the bundled and piled up metal discs continues until a desired shape and size is formed. (That is why the hammered or beaten singing bowls will be proportionately different in a size and diameter with each individual singing bowl.) During the hammering process of these singing bowls, the metal disc can only be hammered during the time of being red hot, while it remains soft and flexible. Because when the metal gets colder, it will loose its softness and flexibility, which in turn makes the metal brittle and thus the bowl could be ruined. The reason behind this intensive working process is that the metal content (bronze or seven metals mixture) is very sensitive to heat and gets harder when it looses its hot temperature and will get cracks and breaks.
After completion of shaping the desired bowls, the individual work will start. At this stage, every bowl is brought into uniform shape and size, and once more, this can only be done during the red burning and heating and beating process. After finalizing the shape and size, more hammering is done for a final fine tuning and shaping of the singing bowls. The individual singing bowls are then chiselled and scoured for the finishing touch, at the inside and outside.

Image for: Singing Bowl OHM (engraving)

Singing Bowl OHM (engraving)

Productnr.: NE0264/12

Weight: 475-550 g; Dimensions: 13.00 cm

Singing Bowl OHM: original singing bowl - with the OHM symbol engraved in the interior

Attention please !
You need to order the singing bowl rubbing sticks separately - see singing bowl accessories: www.phoeniximport.eu/pag,en,cat,565.html 

Beaten Singing Bowls: Beaten or hand hammered singing bowls are made by way of a complete hand hammering process. Every single singing bowl is carefully hand beaten, which requires several processes to finish up and shaping it into a perfect hand hammered singing bowl. In the making process, first the various composition of metals as raw materials (copper, tin, zinc, iron, lead, gold and silver) are melted in furnace, depending on manufacturing needs such as for the making of bronze singing bowls or for seven metal singing bowls. The hot melted metal is removed from the furnace and poured into dice to prepare a metal mould for the various sizes and weights. Then, the round metal moulds are cut into round metal discs in needed size and thickness. After that, these discs are hand beaten or hammered, after precise measurement and categorized for weight and sized bowls. Regarding the hand hammering process of singing bowls, 4 to 5 metal discs are piled up, one upon the other, and then heated to red hot. The red hot metal sheets are hammered by a group of expert artisans, as long as the heat remains in metal, and then again processed to red heating, for a continuous beating process. This heating and beating  of the bundled and piled up metal discs continues until a desired shape and size is formed. (That is why the hammered or beaten singing bowls will be proportionately different in a size and diameter with each individual singing bowl.) During the hammering process of these singing bowls, the metal disc can only be hammered during the time of being red hot, while it remains soft and flexible. Because when the metal gets colder, it will loose its softness and flexibility, which in turn makes the metal brittle and thus the bowl could be ruined. The reason behind this intensive working process is that the metal content (bronze or seven metals mixture) is very sensitive to heat and gets harder when it looses its hot temperature and will get cracks and breaks.
After completion of shaping the desired bowls, the individual work will start. At this stage, every bowl is brought into uniform shape and size, and once more, this can only be done during the red burning and heating and beating process. After finalizing the shape and size, more hammering is done for a final fine tuning and shaping of the singing bowls. The individual singing bowls are then chiselled and scoured for the finishing touch, at the inside and outside.

Image for: Singing Bowl OHM (engraving)

Singing Bowl OHM (engraving)

Productnr.: NE0264/14

Weight: 575-650 g; Dimensions: 13.5-15 cm

Singing Bowl OHM: original singing bowl - with the OHM symbol engraved in the interior

Attention please !
You need to order the singing bowl rubbing sticks separately - see singing bowl accessories: www.phoeniximport.eu/pag,en,cat,565.html 

Beaten Singing Bowls: Beaten or hand hammered singing bowls are made by way of a complete hand hammering process. Every single singing bowl is carefully hand beaten, which requires several processes to finish up and shaping it into a perfect hand hammered singing bowl. In the making process, first the various composition of metals as raw materials (copper, tin, zinc, iron, lead, gold and silver) are melted in furnace, depending on manufacturing needs such as for the making of bronze singing bowls or for seven metal singing bowls. The hot melted metal is removed from the furnace and poured into dice to prepare a metal mould for the various sizes and weights. Then, the round metal moulds are cut into round metal discs in needed size and thickness. After that, these discs are hand beaten or hammered, after precise measurement and categorized for weight and sized bowls. Regarding the hand hammering process of singing bowls, 4 to 5 metal discs are piled up, one upon the other, and then heated to red hot. The red hot metal sheets are hammered by a group of expert artisans, as long as the heat remains in metal, and then again processed to red heating, for a continuous beating process. This heating and beating  of the bundled and piled up metal discs continues until a desired shape and size is formed. (That is why the hammered or beaten singing bowls will be proportionately different in a size and diameter with each individual singing bowl.) During the hammering process of these singing bowls, the metal disc can only be hammered during the time of being red hot, while it remains soft and flexible. Because when the metal gets colder, it will loose its softness and flexibility, which in turn makes the metal brittle and thus the bowl could be ruined. The reason behind this intensive working process is that the metal content (bronze or seven metals mixture) is very sensitive to heat and gets harder when it looses its hot temperature and will get cracks and breaks.
After completion of shaping the desired bowls, the individual work will start. At this stage, every bowl is brought into uniform shape and size, and once more, this can only be done during the red burning and heating and beating process. After finalizing the shape and size, more hammering is done for a final fine tuning and shaping of the singing bowls. The individual singing bowls are then chiselled and scoured for the finishing touch, at the inside and outside.

Image for: Singing Bowl OHM (engraving)

Singing Bowl OHM (engraving)

Productnr.: NE0264/15

Weight: 650-800 g; Dimensions: 15.5 cm

Singing Bowl OHM: original singing bowl - with the OHM symbol engraved in the interior

Attention please !
You need to order the singing bowl rubbing sticks separately - see singing bowl accessories: www.phoeniximport.eu/pag,en,cat,565.html 

Beaten Singing Bowls: Beaten or hand hammered singing bowls are made by way of a complete hand hammering process. Every single singing bowl is carefully hand beaten, which requires several processes to finish up and shaping it into a perfect hand hammered singing bowl. In the making process, first the various composition of metals as raw materials (copper, tin, zinc, iron, lead, gold and silver) are melted in furnace, depending on manufacturing needs such as for the making of bronze singing bowls or for seven metal singing bowls. The hot melted metal is removed from the furnace and poured into dice to prepare a metal mould for the various sizes and weights. Then, the round metal moulds are cut into round metal discs in needed size and thickness. After that, these discs are hand beaten or hammered, after precise measurement and categorized for weight and sized bowls. Regarding the hand hammering process of singing bowls, 4 to 5 metal discs are piled up, one upon the other, and then heated to red hot. The red hot metal sheets are hammered by a group of expert artisans, as long as the heat remains in metal, and then again processed to red heating, for a continuous beating process. This heating and beating  of the bundled and piled up metal discs continues until a desired shape and size is formed. (That is why the hammered or beaten singing bowls will be proportionately different in a size and diameter with each individual singing bowl.) During the hammering process of these singing bowls, the metal disc can only be hammered during the time of being red hot, while it remains soft and flexible. Because when the metal gets colder, it will loose its softness and flexibility, which in turn makes the metal brittle and thus the bowl could be ruined. The reason behind this intensive working process is that the metal content (bronze or seven metals mixture) is very sensitive to heat and gets harder when it looses its hot temperature and will get cracks and breaks.
After completion of shaping the desired bowls, the individual work will start. At this stage, every bowl is brought into uniform shape and size, and once more, this can only be done during the red burning and heating and beating process. After finalizing the shape and size, more hammering is done for a final fine tuning and shaping of the singing bowls. The individual singing bowls are then chiselled and scoured for the finishing touch, at the inside and outside.

Image for: Singing Bowl OHM (engraving)

Singing Bowl OHM (engraving)

Productnr.: NE0264/16

Weight: 800-900 g; Dimensions: 17 cm

Singing Bowl OHM: original singing bowl - with the OHM symbol engraved in the interior

Attention please !
You need to order the singing bowl rubbing sticks separately - see singing bowl accessories: www.phoeniximport.eu/pag,en,cat,565.html 

Beaten Singing Bowls: Beaten or hand hammered singing bowls are made by way of a complete hand hammering process. Every single singing bowl is carefully hand beaten, which requires several processes to finish up and shaping it into a perfect hand hammered singing bowl. In the making process, first the various composition of metals as raw materials (copper, tin, zinc, iron, lead, gold and silver) are melted in furnace, depending on manufacturing needs such as for the making of bronze singing bowls or for seven metal singing bowls. The hot melted metal is removed from the furnace and poured into dice to prepare a metal mould for the various sizes and weights. Then, the round metal moulds are cut into round metal discs in needed size and thickness. After that, these discs are hand beaten or hammered, after precise measurement and categorized for weight and sized bowls. Regarding the hand hammering process of singing bowls, 4 to 5 metal discs are piled up, one upon the other, and then heated to red hot. The red hot metal sheets are hammered by a group of expert artisans, as long as the heat remains in metal, and then again processed to red heating, for a continuous beating process. This heating and beating  of the bundled and piled up metal discs continues until a desired shape and size is formed. (That is why the hammered or beaten singing bowls will be proportionately different in a size and diameter with each individual singing bowl.) During the hammering process of these singing bowls, the metal disc can only be hammered during the time of being red hot, while it remains soft and flexible. Because when the metal gets colder, it will loose its softness and flexibility, which in turn makes the metal brittle and thus the bowl could be ruined. The reason behind this intensive working process is that the metal content (bronze or seven metals mixture) is very sensitive to heat and gets harder when it looses its hot temperature and will get cracks and breaks.
After completion of shaping the desired bowls, the individual work will start. At this stage, every bowl is brought into uniform shape and size, and once more, this can only be done during the red burning and heating and beating process. After finalizing the shape and size, more hammering is done for a final fine tuning and shaping of the singing bowls. The individual singing bowls are then chiselled and scoured for the finishing touch, at the inside and outside.

Image for: Singing Bowl OHM (engraving)

Singing Bowl OHM (engraving)

Productnr.: NE0264/21

Weight: 1100-1200 g; Dimensions: 18.5-20 cm

Singing Bowl OHM: original singing bowl - with the OHM symbol engraved in the interior

Attention please !
You need to order the singing bowl rubbing sticks separately - see singing bowl accessories: www.phoeniximport.eu/pag,en,cat,565.html 

Beaten Singing Bowls: Beaten or hand hammered singing bowls are made by way of a complete hand hammering process. Every single singing bowl is carefully hand beaten, which requires several processes to finish up and shaping it into a perfect hand hammered singing bowl. In the making process, first the various composition of metals as raw materials (copper, tin, zinc, iron, lead, gold and silver) are melted in furnace, depending on manufacturing needs such as for the making of bronze singing bowls or for seven metal singing bowls. The hot melted metal is removed from the furnace and poured into dice to prepare a metal mould for the various sizes and weights. Then, the round metal moulds are cut into round metal discs in needed size and thickness. After that, these discs are hand beaten or hammered, after precise measurement and categorized for weight and sized bowls. Regarding the hand hammering process of singing bowls, 4 to 5 metal discs are piled up, one upon the other, and then heated to red hot. The red hot metal sheets are hammered by a group of expert artisans, as long as the heat remains in metal, and then again processed to red heating, for a continuous beating process. This heating and beating  of the bundled and piled up metal discs continues until a desired shape and size is formed. (That is why the hammered or beaten singing bowls will be proportionately different in a size and diameter with each individual singing bowl.) During the hammering process of these singing bowls, the metal disc can only be hammered during the time of being red hot, while it remains soft and flexible. Because when the metal gets colder, it will loose its softness and flexibility, which in turn makes the metal brittle and thus the bowl could be ruined. The reason behind this intensive working process is that the metal content (bronze or seven metals mixture) is very sensitive to heat and gets harder when it looses its hot temperature and will get cracks and breaks.
After completion of shaping the desired bowls, the individual work will start. At this stage, every bowl is brought into uniform shape and size, and once more, this can only be done during the red burning and heating and beating process. After finalizing the shape and size, more hammering is done for a final fine tuning and shaping of the singing bowls. The individual singing bowls are then chiselled and scoured for the finishing touch, at the inside and outside.

Image for: Singing Bowl OHM (engraving)

Singing Bowl OHM (engraving)

Productnr.: NE0264/22

Weight: 1200-1350 g; Dimensions: 20-22 cm

Singing Bowl OHM: original singing bowl - with the OHM symbol engraved in the interior 

Attention please !
You need to order the singing bowl rubbing sticks separately - see singing bowl accessories: www.phoeniximport.eu/pag,en,cat,565.html

Beaten Singing Bowls: Beaten or hand hammered singing bowls are made by way of a complete hand hammering process. Every single singing bowl is carefully hand beaten, which requires several processes to finish up and shaping it into a perfect hand hammered singing bowl. In the making process, first the various composition of metals as raw materials (copper, tin, zinc, iron, lead, gold and silver) are melted in furnace, depending on manufacturing needs such as for the making of bronze singing bowls or for seven metal singing bowls. The hot melted metal is removed from the furnace and poured into dice to prepare a metal mould for the various sizes and weights. Then, the round metal moulds are cut into round metal discs in needed size and thickness. After that, these discs are hand beaten or hammered, after precise measurement and categorized for weight and sized bowls. Regarding the hand hammering process of singing bowls, 4 to 5 metal discs are piled up, one upon the other, and then heated to red hot. The red hot metal sheets are hammered by a group of expert artisans, as long as the heat remains in metal, and then again processed to red heating, for a continuous beating process. This heating and beating  of the bundled and piled up metal discs continues until a desired shape and size is formed. (That is why the hammered or beaten singing bowls will be proportionately different in a size and diameter with each individual singing bowl.) During the hammering process of these singing bowls, the metal disc can only be hammered during the time of being red hot, while it remains soft and flexible. Because when the metal gets colder, it will loose its softness and flexibility, which in turn makes the metal brittle and thus the bowl could be ruined. The reason behind this intensive working process is that the metal content (bronze or seven metals mixture) is very sensitive to heat and gets harder when it looses its hot temperature and will get cracks and breaks.
After completion of shaping the desired bowls, the individual work will start. At this stage, every bowl is brought into uniform shape and size, and once more, this can only be done during the red burning and heating and beating process. After finalizing the shape and size, more hammering is done for a final fine tuning and shaping of the singing bowls. The individual singing bowls are then chiselled and scoured for the finishing touch, at the inside and outside.

Image for: Singing Bowl OHM (engraving)

Singing Bowl OHM (engraving)

Productnr.: NE0264/26

Weight: 1450-1550 g; Dimensions: 20-22 cm

Singing Bowl OHM: original singing bowl - with the OHM symbol engraved in the interior

Attention please !
You need to order the singing bowl rubbing sticks separately - see singing bowl accessories: www.phoeniximport.eu/pag,en,cat,565.html
 

Beaten Singing Bowls: Beaten or hand hammered singing bowls are made by way of a complete hand hammering process. Every single singing bowl is carefully hand beaten, which requires several processes to finish up and shaping it into a perfect hand hammered singing bowl. In the making process, first the various composition of metals as raw materials (copper, tin, zinc, iron, lead, gold and silver) are melted in furnace, depending on manufacturing needs such as for the making of bronze singing bowls or for seven metal singing bowls. The hot melted metal is removed from the furnace and poured into dice to prepare a metal mould for the various sizes and weights. Then, the round metal moulds are cut into round metal discs in needed size and thickness. After that, these discs are hand beaten or hammered, after precise measurement and categorized for weight and sized bowls. Regarding the hand hammering process of singing bowls, 4 to 5 metal discs are piled up, one upon the other, and then heated to red hot. The red hot metal sheets are hammered by a group of expert artisans, as long as the heat remains in metal, and then again processed to red heating, for a continuous beating process. This heating and beating  of the bundled and piled up metal discs continues until a desired shape and size is formed. (That is why the hammered or beaten singing bowls will be proportionately different in a size and diameter with each individual singing bowl.) During the hammering process of these singing bowls, the metal disc can only be hammered during the time of being red hot, while it remains soft and flexible. Because when the metal gets colder, it will loose its softness and flexibility, which in turn makes the metal brittle and thus the bowl could be ruined. The reason behind this intensive working process is that the metal content (bronze or seven metals mixture) is very sensitive to heat and gets harder when it looses its hot temperature and will get cracks and breaks.
After completion of shaping the desired bowls, the individual work will start. At this stage, every bowl is brought into uniform shape and size, and once more, this can only be done during the red burning and heating and beating process. After finalizing the shape and size, more hammering is done for a final fine tuning and shaping of the singing bowls. The individual singing bowls are then chiselled and scoured for the finishing touch, at the inside and outside.

Image for: Singing Bowl OHM (engraving)

Singing Bowl OHM (engraving)

Productnr.: NE0264/27

Weight: 1950-2050 g; Dimensions: 27.5 cm

Singing Bowl OHM: original singing bowl - with the OHM symbol in the interior

Attention please !
You need to order the singing bowl rubbing sticks separately - see singing bowl accessories: www.phoeniximport.eu/pag,en,cat,565.html 

Beaten Singing Bowls: Beaten or hand hammered singing bowls are made by way of a complete hand hammering process. Every single singing bowl is carefully hand beaten, which requires several processes to finish up and shaping it into a perfect hand hammered singing bowl. In the making process, first the various composition of metals as raw materials (copper, tin, zinc, iron, lead, gold and silver) are melted in furnace, depending on manufacturing needs such as for the making of bronze singing bowls or for seven metal singing bowls. The hot melted metal is removed from the furnace and poured into dice to prepare a metal mould for the various sizes and weights. Then, the round metal moulds are cut into round metal discs in needed size and thickness. After that, these discs are hand beaten or hammered, after precise measurement and categorized for weight and sized bowls. Regarding the hand hammering process of singing bowls, 4 to 5 metal discs are piled up, one upon the other, and then heated to red hot. The red hot metal sheets are hammered by a group of expert artisans, as long as the heat remains in metal, and then again processed to red heating, for a continuous beating process. This heating and beating  of the bundled and piled up metal discs continues until a desired shape and size is formed. (That is why the hammered or beaten singing bowls will be proportionately different in a size and diameter with each individual singing bowl.) During the hammering process of these singing bowls, the metal disc can only be hammered during the time of being red hot, while it remains soft and flexible. Because when the metal gets colder, it will loose its softness and flexibility, which in turn makes the metal brittle and thus the bowl could be ruined. The reason behind this intensive working process is that the metal content (bronze or seven metals mixture) is very sensitive to heat and gets harder when it looses its hot temperature and will get cracks and breaks.
After completion of shaping the desired bowls, the individual work will start. At this stage, every bowl is brought into uniform shape and size, and once more, this can only be done during the red burning and heating and beating process. After finalizing the shape and size, more hammering is done for a final fine tuning and shaping of the singing bowls. The individual singing bowls are then chiselled and scoured for the finishing touch, at the inside and outside.

Image for: Singing Bowl OHM (engraving)

Singing Bowl OHM (engraving)

Productnr.: NE0264/29

Weight: 2450-2550 g; Dimensions: 29 cm

Singing Bowl OHM: original singing bowl - with the OHM symbol engraved in the interior

Attention please ! 
You need to order the singing bowl rubbing sticks separately - see singing bowl accessories: www.phoeniximport.eu/pag,en,cat,565.html 

Beaten Singing Bowls: Beaten or hand hammered singing bowls are made by way of a complete hand hammering process. Every single singing bowl is carefully hand beaten, which requires several processes to finish up and shaping it into a perfect hand hammered singing bowl. In the making process, first the various composition of metals as raw materials (copper, tin, zinc, iron, lead, gold and silver) are melted in furnace, depending on manufacturing needs such as for the making of bronze singing bowls or for seven metal singing bowls. The hot melted metal is removed from the furnace and poured into dice to prepare a metal mould for the various sizes and weights. Then, the round metal moulds are cut into round metal discs in needed size and thickness. After that, these discs are hand beaten or hammered, after precise measurement and categorized for weight and sized bowls. Regarding the hand hammering process of singing bowls, 4 to 5 metal discs are piled up, one upon the other, and then heated to red hot. The red hot metal sheets are hammered by a group of expert artisans, as long as the heat remains in metal, and then again processed to red heating, for a continuous beating process. This heating and beating  of the bundled and piled up metal discs continues until a desired shape and size is formed. (That is why the hammered or beaten singing bowls will be proportionately different in a size and diameter with each individual singing bowl.) During the hammering process of these singing bowls, the metal disc can only be hammered during the time of being red hot, while it remains soft and flexible. Because when the metal gets colder, it will loose its softness and flexibility, which in turn makes the metal brittle and thus the bowl could be ruined. The reason behind this intensive working process is that the metal content (bronze or seven metals mixture) is very sensitive to heat and gets harder when it looses its hot temperature and will get cracks and breaks.
After completion of shaping the desired bowls, the individual work will start. At this stage, every bowl is brought into uniform shape and size, and once more, this can only be done during the red burning and heating and beating process. After finalizing the shape and size, more hammering is done for a final fine tuning and shaping of the singing bowls. The individual singing bowls are then chiselled and scoured for the finishing touch, at the inside and outside.

Image for: Singing Bowl OHM (engraving)

Singing Bowl OHM (engraving)

Productnr.: NE0264/30

Weight: 2600-2800 g; Dimensions: 30 cm

Singing Bowl OHM: original singing bowl - with the OHM symbol engraved in the interior

Attention please !
You need to order the singing bowl rubbing sticks separately - see singing bowl accessories: www.phoeniximport.eu/pag,en,cat,565.html 

Beaten Singing Bowls: Beaten or hand hammered singing bowls are made by way of a complete hand hammering process. Every single singing bowl is carefully hand beaten, which requires several processes to finish up and shaping it into a perfect hand hammered singing bowl. In the making process, first the various composition of metals as raw materials (copper, tin, zinc, iron, lead, gold and silver) are melted in furnace, depending on manufacturing needs such as for the making of bronze singing bowls or for seven metal singing bowls. The hot melted metal is removed from the furnace and poured into dice to prepare a metal mould for the various sizes and weights. Then, the round metal moulds are cut into round metal discs in needed size and thickness. After that, these discs are hand beaten or hammered, after precise measurement and categorized for weight and sized bowls. Regarding the hand hammering process of singing bowls, 4 to 5 metal discs are piled up, one upon the other, and then heated to red hot. The red hot metal sheets are hammered by a group of expert artisans, as long as the heat remains in metal, and then again processed to red heating, for a continuous beating process. This heating and beating  of the bundled and piled up metal discs continues until a desired shape and size is formed. (That is why the hammered or beaten singing bowls will be proportionately different in a size and diameter with each individual singing bowl.) During the hammering process of these singing bowls, the metal disc can only be hammered during the time of being red hot, while it remains soft and flexible. Because when the metal gets colder, it will loose its softness and flexibility, which in turn makes the metal brittle and thus the bowl could be ruined. The reason behind this intensive working process is that the metal content (bronze or seven metals mixture) is very sensitive to heat and gets harder when it looses its hot temperature and will get cracks and breaks.
After completion of shaping the desired bowls, the individual work will start. At this stage, every bowl is brought into uniform shape and size, and once more, this can only be done during the red burning and heating and beating process. After finalizing the shape and size, more hammering is done for a final fine tuning and shaping of the singing bowls. The individual singing bowls are then chiselled and scoured for the finishing touch, at the inside and outside.

Products 1 - 17 of 17

Yogi & Yogini

Our Trademarks

Products for
Yogis & Yoginis

Designed with love

For men and women

For body and mind

For Joy and Happiness!

Our Trademarks

Meditation

Healthy Lifestyle

Yogatools

New products

Display with…

Crystal Handh…

Kundalini hot…

Crystal Handh…

corporate social responsibility 

Mani Bhadra B.V. - Phoenix Import: Importer and wholesaler

HELLO

Mani Bhadra B.V. - Phoenix Import is a forward-thinking company!  
We embed sustainability into the core of our business operations to create shared value for business and society. 
We are proud to be a socially responsible cooperation. To our customers and those of you looking for products that contribute to vitality, joy, peace and spiritual development, we would like to say: you can enjoy doing business with us and know that we care for both our producers and their workers, for our products, for our customers and for the world. We delight in serving you in the best way we can.

From our team, from our heart.

Who can buy from us?

Mani Bhadra B.V. – Phoenix Import is a Business-to-Business (B2B) wholesaler. We deliver to resellers, wholesalers, yoga studios, meditation centres, conference centres, (sound) therapists, etc., both in  Europe and overseas.


Links for rapid access to:

> Contact form
> Reports on delivery form
>
 FAQ

Cookie setting

This website uses Google Analytics to analyze your use of our sites so we can determine how best to serve you. We also use cookies from e.g. Facebook, Twitter and Google to integrate social media into our website. Below you can decide which cookies we can and cannot use.

More information is available at "Privacy & Cookies".